Management system standards

ISO 45001

How to manage your safety data sheets and chemical register for ISO 45001: current SDS for every product, worker access, and risk assessments built on them.

Reviewed 16 November 2026

Quick answer

ISO 45001 does not name safety data sheets, but in an audit of any site that uses chemicals the SDS is central evidence: auditors expect a current SDS for every hazardous product, accessible to workers, a chemical register and a risk assessment built on the SDS. You also keep a legal register with the national exposure limits and CMR rules, substitute high hazard products where you can and evaluate your compliance. The current edition is ISO 45001:2018 with its 2024 climate amendment; a revised edition is in draft.

What it is

ISO 45001 is certified by accredited third party certification bodies. It describes how an employer should manage occupational health and safety. You involve your workers, identify hazards and assess risks, find out which legal requirements apply, reduce risks using the hierarchy of controls, control purchasing and contractors, prepare for emergencies and check your compliance. The standard contains no exposure limits and no substance lists. Hazardous chemicals are one of the main hazards it must cover, so the SDS, the chemical inventory, the national exposure limit list and the chemical risk assessment are central evidence in any audit of a site that uses chemicals. It replaced the British scheme BS OHSAS 18001 and is published in English and French.

Does it apply to you?

  • You hold, or want to obtain, an ISO 45001 certificate.
  • Your customers, a contractor scheme or a tender ask for ISO 45001 certification.
  • Your workers or contractors use, store or can be exposed to hazardous chemicals.
  • When you apply for certification, the certification body asks you to list the main hazardous materials you use.

Managing your safety data sheets

ISO 45001 sets no SDS rule of its own. Your supplier must send you an SDS and update it (REACH article 31, in the 16 section format of REACH Annex II), and national workplace law makes you give workers access to it (in Belgium Codex art. VI.1-27). The standard expects you to show that you manage those SDS.

Task What applies
Collect SDS from suppliers Get an SDS for every hazardous product; the SDS is the main hazard input for your risk assessment (clause 6.1.2). Check the SDS before a new chemical is bought (clauses 8.1.3 and 8.1.4).
Check language and version Keep each SDS in the local language; REACH article 31 requires the official language of the country where the product is placed on the market. Check that it follows the REACH Annex II format and shows a revision date.
Keep SDS current SDS are documented information that must be controlled, current and available where needed (clause 7.5). Replace old versions when the supplier sends an update.
Give workers access Workers and their representatives have timely access to the SDS of the products they use (clauses 5.4 and 7.3).
Use them in the risk assessment Use SDS sections 2, 3, 7, 8, 9 and 11 for hazard identification and risk assessment (clause 6.1.2), and sections 4, 5 and 6 for emergency plans (clause 8.2).
Keep a chemical register A register per site and workplace with products, quantities and users, as the basis for hazard identification (clause 6.1.2).
Keep records The standard sets no fixed retention period; you retain documented evidence of your compliance evaluations (clause 9.1.2).
What the auditor asks The chemical register, current SDS at the workplace, risk assessments that use them, and a legal register with the national exposure limits.

What you need to do

  1. Keep a chemical register per site and workplace, with products, quantities and users.
  2. Keep a current SDS for every product, accessible to workers, in the local language.
  3. Carry out a chemical risk assessment per product or task, based on the SDS (clause 6.1.2).
  4. Keep a legal register with the national chemical agents rules, exposure limits and CMR rules (clause 6.1.3).
  5. Measure workplace exposure and compare the results with the national exposure limits (clause 9.1.1).
  6. Review CMR and other high hazard products for substitution first (clause 8.1.2).
  7. Approve new chemicals before purchase by checking the SDS (clauses 8.1.3 and 8.1.4).
  8. Set rules for contractors who bring or are exposed to hazardous products (clause 8.1.4).
  9. Consult workers and their representatives on chemical risks and give them access to the SDS (clause 5.4).
  10. Prepare and test spill, exposure and first aid procedures using the SDS (clause 8.2).
  11. Evaluate your legal compliance at planned intervals and keep dated records (clause 9.1.2).

What NextSDS checks for you

Check SDS data used What it tells you
Hazard classification Section 2 (CLP classification, H statements) The hazards to cover in your risk assessment
CMR and sensitiser flags Sections 2 and 3 (H statements, CAS numbers) Which products need priority substitution review
National exposure limits Section 3 (CAS numbers), section 8 Which substances have a national limit and its value, the reference for measurements
National CMR and worker protection lists Section 3 (CAS numbers), section 2 Which products fall under stricter national rules, for example for young or pregnant workers
Toxicology and physical data Sections 9 and 11 Input for the risk assessment
Emergency information Sections 4, 5 and 6 First aid, fire fighting and spill data for responders
SDS currency and language Whole SDS (revision date) Whether each SDS is current and in the right language

Key lists and limits

ISO 45001 has no substance list and no exposure limits. All lists and limits come in through your legal register (clause 6.1.3), mainly the national exposure limit list and the national CMR lists. In Belgium these are the binding limits in Codex annex VI.1-1 and the carcinogen, reprotoxic and endocrine disruptor lists in annexes VI.2-1 to VI.2-4: see Belgium. For other countries see for example the Netherlands and the United States.

Key dates

  • The revised edition and its transition period have not yet been announced.
  • 17 June 2026: draft of the revised standard (ISO/DIS 45001) opened for ballot.
  • 23 February 2024: climate action amendment published; no transition needed.
  • March 2018: ISO 45001:2018 published.

Frequently asked questions

What is the current version of ISO 45001?

ISO 45001:2018 with the climate action amendment ISO 45001:2018/Amd 1:2024. A revised edition is in draft: ISO/DIS 45001 opened for ballot on 17 June 2026, but no publication date and no transition period have been announced yet.

Does ISO 45001 require safety data sheets?

Not by name. In practice an auditor expects a current SDS for every hazardous product, available to workers, because the SDS is the main hazard information for your risk assessment (clause 6.1.2) and is controlled documented information (clause 7.5). Your supplier’s duty to send and update the SDS comes from REACH article 31.

Does ISO 45001 require a chemical register?

The standard does not name one, but a chemical register per site and workplace, with products, quantities and users, is the usual evidence for hazard identification. At application the certification body asks for the main hazardous materials you use.

What does an ISO 45001 auditor ask about SDS?

Typically: the chemical register, a current SDS for each product at the workplace in the local language, risk assessments that refer to the SDS, a check of the SDS before new products are bought, and a legal register with the national exposure limits.

Does ISO 45001 require a chemical risk assessment?

Yes. Clause 6.1.2 requires hazard identification and risk assessment, and hazardous chemicals are one of the main hazards it must cover. The SDS is the basic input.

Does ISO 45001 set exposure limits?

No. It has no exposure limits and no substance lists. The national exposure limits enter through your legal register under clause 6.1.3.

What is the hierarchy of controls in ISO 45001?

Clause 8.1.2 requires you to eliminate hazards and reduce risks in a fixed order: elimination, substitution, engineering controls and reorganisation of work, administrative controls including training, and personal protective equipment. For chemicals, substitution of hazardous products is the key step.

Did ISO 45001 replace OHSAS 18001?

Yes. BS OHSAS 18001:2007 is withdrawn and certificates were migrated to ISO 45001 after 2018.

  • ISO 14001: the environmental counterpart, using the same chemical inventory and SDS library.
  • VCA: contractor safety certification widely used in Belgium and the Netherlands.
  • EcoVadis: a valid ISO 45001 certificate counts as evidence in the rating.
  • Belgium: binding exposure limits and CMR lists for your legal register.
  • Netherlands: Dutch exposure limits and chemical rules for your legal register.
  • United States: US exposure limits and hazard communication rules for your legal register.

Official sources

Based on research of 16 November 2026. This page is not legal advice; always check the official text.

2,437 SDSs. None left to chase.

Managing safety data sheets under ISO 45001 rules? NextSDS tracks down every SDS from your suppliers, processes all 16 sections and checks each one against current regulations.

Get started todaySee how NextSDS works