Quick answer
To get or keep the Nordic Swan for cleaning products (026 version 7.1), you collect the safety data sheet (SDS) of your product and of every raw material and screen them: the product may not carry most health and environmental hazard classifications, and no ingoing substance may carry an excluded classification or belong to a banned group such as PFAS, isothiazolinones or Candidate List substances. Excluded ingoing substances have a limit of 0 ppm, so the SDS alone is rarely enough and raw material suppliers sign declarations too.
What it is
The Nordic Swan is the official ecolabel of the Nordic countries. For chemical products it works like the EU Ecolabel, but its chemical requirements are usually stricter and broader. The final product may not carry most health and environmental hazard classifications, every ingoing substance is screened against a list of excluded CLP classifications, and named substance groups such as PFAS, isothiazolinones, phthalates, siloxanes, endocrine disruptors and Candidate List substances are banned. Excluded ingoing substances have a limit of 0 ppm; only impurities below a set level, usually 100 ppm, are tolerated. Evidence comes from the SDS of the product and of every raw material, plus signed declarations from the manufacturer and each raw material supplier.
Does it apply to you?
- You make cleaning products, paints and varnishes or other chemical products and want to sell them with the Nordic Swan in the Nordic markets.
- You bid in Nordic public tenders that ask for the Nordic Swan or equivalent.
- You supply raw materials to a licence holder: you must sign a raw material declaration and give your SDS.
- Other chemical product groups have their own criteria, for example laundry and dishwasher detergents, industrial cleaning and degreasing agents, cleaning agents for the food industry and chemical building products.
Managing your safety data sheets
| Task | What applies |
|---|---|
| Collect SDS from suppliers | Get the SDS of every raw material. It is the evidence for the classification of ingoing substances (O5 in cleaning products 026, O3 in paints 096). |
| Check your product SDS | The product SDS, in the format of REACH Annex II, is the evidence that the product carries none of the excluded hazard classifications (O2). |
| Know the limits of the SDS | SDS section 3 lists only classified substances above CLP thresholds. With the 0 ppm rule you also need a signed raw material supplier declaration (Appendix 2) or a declaration in the Supply Chain Declaration Portal. |
| Keep SDS current | Check every new raw material and every SDS revision before it enters a licensed product. A raw material SDS that gains an excluded classification puts the licence at risk. |
| Keep an ingredient inventory | Disclose the full recipe, including all known constituents of UVCB substances, and keep it in line with the SDS you hold. |
| What Nordic Ecolabelling asks | The product SDS, the SDS of every raw material, the signed manufacturer declaration (Appendix 1) and a declaration per raw material (Appendix 2). |
What you need to do
- Find the criteria document and version for your product group.
- Check that your product SDS shows none of the excluded hazard classifications.
- Collect the SDS of every raw material and check each ingoing substance against the excluded classifications.
- Check every ingoing substance against the excluded substance groups, including PFAS, isothiazolinones, phthalates, siloxanes and Candidate List substances.
- Disclose the full recipe, including all known constituents of UVCB substances.
- Ask each raw material supplier to sign the raw material supplier declaration, or to declare in the Supply Chain Declaration Portal.
- Sign the manufacturer declaration for your own product.
- Run the aquatic toxicity and biodegradability calculations with the DID list.
- Check every new raw material or SDS revision before it enters a licensed product.
- Plan the move to the new generation before the current criteria version expires.
What NextSDS checks for you
| Check | SDS data used | What it tells you |
|---|---|---|
| Excluded product classifications | Section 2 (H and EUH statements) | Whether the product carries a hazard that blocks the label, including EUH208 and, for paints, physical hazards |
| Excluded ingoing classifications | Section 3 of each raw material SDS | Which ingoing substances carry a classification that is not allowed |
| Excluded and prohibited substances | Section 3 (CAS and EC numbers) | Whether a named excluded substance or group appears in the recipe |
| Candidate List and endocrine disruptor lists | Section 3 (CAS and EC numbers) | Whether an ingoing substance is a Candidate List SVHC or on the EU member state ED lists |
| Undisclosed constituents | Section 3 | Which UVCBs or substances below SDS disclosure limits need a supplier declaration |
| Raw material changes | Revised raw material SDS | When a raw material gains an excluded classification |
Key lists and limits
- Excluded classifications, cleaning products 026: hazard classes the product may not carry (requirement O2) and that no ingoing substance may carry (O5). Criteria (PDF)
- Excluded substances, cleaning products 026: named substances and groups banned at 0 ppm (O6), plus microplastics (O7).
- Excluded classifications and prohibited substances, paints and varnishes 096: product and ingoing substance classifications (O2, O3) and prohibited substance groups (O12). Criteria (PDF)
- External lists used: REACH Candidate List, EU member state ED lists, ECHA PBT assessments and the DID list 2023.
- Limits: excluded ingoing substances 0 ppm; impurities up to 100 ppm, or 50 ppm for formaldehyde and arylamines in cleaning products.
Biocidal products cannot carry the Nordic Swan in the cleaning products group.
Key dates
- 31 March 2031: end of validity of cleaning products 026 version 7.
- 15 September 2028: end of validity of paints and varnishes 096 version 4.
- 31 August 2027: end of validity of the previous cleaning products generation 6.
- 22 September and 13 October 2026: changes to cleaning products 026, leading to version 7.1.
- 9 June 2026: paints and varnishes 096 version 4.8 adopted.
- 11 March 2026: cleaning products 026 version 7.0 adopted; generation 7 starts.
Frequently asked questions
Which SDS do I need for a Nordic Swan application?
The SDS of the finished product and the SDS of every raw material. The product SDS shows the product classification; the raw material SDS show the classification of each ingoing substance.
Is the SDS enough to prove 0 ppm?
Rarely. SDS section 3 only lists classified substances above CLP thresholds, so raw material suppliers also sign a declaration or declare in the Supply Chain Declaration Portal.
What happens when a raw material SDS changes?
Check it before the raw material enters a licensed product again. If the new SDS shows an excluded classification, the product no longer meets the criteria with that raw material.
What is the current Nordic Swan version for cleaning products?
Cleaning products 026 version 7.1, changed on 13 October 2026 and valid until 31 March 2031. The previous generation 6 is valid until 31 August 2027.
Which substances are banned in Nordic Swan cleaning products?
Named substances and groups such as PFAS, isothiazolinones, phthalates, siloxanes, endocrine disruptors and Candidate List substances, plus every substance with an excluded CLP classification. Microplastics are also excluded.
What is the limit for excluded substances in the Nordic Swan?
0 ppm for excluded ingoing substances. Impurities are tolerated up to 100 ppm, or 50 ppm for formaldehyde and arylamines in cleaning products.
Can a disinfectant or biocidal product get the Nordic Swan?
Not in the cleaning products group: biocidal products cannot carry the Nordic Swan there.
What do raw material suppliers have to provide?
Their SDS and a signed raw material supplier declaration, or a declaration in the Supply Chain Declaration Portal, including all known constituents of UVCB substances.
Related frameworks
- EU Ecolabel: the EU ecolabel with a similar approach and usually less strict chemical rules.
- Blue Angel: the German government ecolabel with comparable substance exclusions.
- ChemSec SIN List: a list of substances of concern that buyers use alongside ecolabel criteria.
- ISO 14001: environmental management system in which ecolabel goals often sit.
Official sources
- Nordic Swan criteria overview
- Cleaning products 026 version 7
- Paints and varnishes 096 version 4
- Chemical requirements approach
- For suppliers
- Supply Chain Declaration Portal
Based on research of 16 November 2026. This page is not legal advice; always check the official text.