Quick answer
Under EU law, your supplier must give you an SDS in the 16 section REACH Annex II format, in the language of your member state, and update it when new hazard information appears. As a user you keep the latest version of each SDS, give workers access to it, use it in your risk assessment and check it against the EU and national exposure limits and substance lists.
What it is
EU chemicals law sets the baseline in all member states and the EEA. Regulations such as REACH and CLP apply directly; directives on workplace safety, Seveso, industrial emissions, waste and water are transposed into national law, so the national pages show the rules you apply on site. See for example Belgium and the Netherlands. Links on this page go to ReachLex, which publishes the EU chemicals texts, and to EUR-Lex for acts ReachLex does not cover.
Does it apply to you?
- You use, store or sell chemicals in the EU or EEA: REACH and CLP apply to the SDS you receive and pass on.
- You employ workers who handle hazardous chemicals: the EU workplace directives apply through your national law.
- You run an installation under the Industrial Emissions Directive or a Seveso site: environmental rules use the classification and composition data from your SDS.
- You make or sell articles: you must pass on information on Candidate List substances above 0.1 percent.
Managing your safety data sheets
| Task | What applies under EU law |
|---|---|
| Get an SDS for every hazardous product | Suppliers must provide an SDS for hazardous substances and mixtures (REACH article 31). |
| Check the format | The SDS must follow the 16 sections of REACH Annex II, as replaced by Regulation (EU) 2020/878; old format SDS were allowed only until 31 December 2022. |
| Check the language | The SDS must be in the official language or languages of the member state where the product is placed on the market (REACH article 31(5)). |
| Keep SDS current | Suppliers must update the SDS when new information on hazards or risk management becomes available; keep the latest version and replace old ones. |
| Watch the new hazard classes | Endocrine disruptors, PBT, vPvB, PMT and vPvM became CLP hazard classes (Delegated Regulation (EU) 2023/707); SDS of mixtures must show them from 1 May 2026, or 1 May 2028 for mixtures already on the market. |
| Give workers access | Workers must have access to the SDS information for the substances they use (REACH article 35). |
| Use the SDS in the risk assessment | The employer must assess chemical risks using the supplier information (Chemical Agents Directive article 4). |
| Keep a chemical inventory | Installations under the revised Industrial Emissions Directive need a chemicals inventory in their environmental management system, with special attention to Candidate List and REACH Annex XVII substances. |
What you need to do
- Collect an SDS from your supplier for every hazardous substance and mixture you use.
- Check that each SDS follows the REACH Annex II format and is in the language of your member state.
- Keep only the latest SDS version and replace older ones when a supplier sends an update.
- Check updated SDS for the new CLP hazard classes on mixtures from 1 May 2026.
- Give workers access to the SDS of the products they handle.
- Use the SDS in your chemical risk assessment and compare section 8 with the national exposure limits.
- Check the composition in section 3 against the Candidate List, REACH Annex XIV and XVII and the POPs list.
- Keep a chemical inventory if your site falls under the Industrial Emissions Directive or Seveso III.
What NextSDS checks for you
| Check | SDS data used | What it tells you |
|---|---|---|
| Harmonised classification | Section 3 (CAS numbers), section 2 | Whether a substance has a harmonised CLP classification and whether the SDS matches it |
| Restrictions and authorisation | Section 3 (CAS numbers) | Whether a substance is restricted (REACH Annex XVII) or needs authorisation (Annex XIV) |
| Persistent organic pollutants | Section 3 (CAS numbers) | Whether a substance is banned or restricted under the POPs Regulation |
| EU exposure limits | Section 3, section 8 | Which substances have an EU indicative or binding limit value |
| Seveso categories | Section 2 | Which products count towards the Seveso thresholds |
| Emission and water lists | Section 3 (CAS numbers) | Whether a substance is a priority substance for water or a reportable pollutant for the Industrial Emissions Portal |
Key lists and limits
- CLP Annex VI: harmonised classification and labelling of about 4,400 entries. ReachLex
- REACH Annex XVII: restrictions on manufacture, placing on the market and use. ReachLex
- REACH Annex XIV: substances that need authorisation. ReachLex
- SVHC Candidate List: substances of very high concern, published by ECHA; triggers information duties for articles above 0.1 percent.
- POPs Annex I: banned persistent organic pollutants. ReachLex
- EU exposure limits: indicative values under the Chemical Agents Directive and binding values in CMRD Annex III; member states set national limits based on them.
- Water priority substances: environmental quality standards of Directive 2008/105/EC, as amended by Directive (EU) 2026/805.
Key dates
- 20 November 2028: member states must transpose Directive (EU) 2026/2450 (new limits for cobalt, PAH, isoprene, 1,4-dioxane and welding fumes).
- 1 May 2028: end of the transition for SDS and labels of mixtures already on the market with the new CLP hazard classes.
- 1 January 2028: CLP label formatting, advertising and distance sales rules apply.
- 1 July 2027: chemicals inventory in the environmental management system required under the revised Industrial Emissions Directive.
- 1 January 2027: new poison centre rules under the CLP revision apply.
- 23 December 2026: DNELs for DMAC and NEP must appear in the SDS.
- 19 November 2026: Directive (EU) 2026/2450 enters into force.
- 1 July 2026: most rules of the CLP revision (EU) 2024/2865 apply.
- 1 May 2026: new CLP hazard classes apply to new mixtures.
Frequently asked questions
Which format must a safety data sheet follow in the EU?
The 16 section format of REACH Annex II, as replaced by Regulation (EU) 2020/878. SDS in the older format were allowed only until 31 December 2022.
In which language must an SDS be in the EU?
In the official language or languages of the member state where the product is placed on the market, unless that member state decides otherwise (REACH article 31(5)). Check the national page for the exact rule.
How often must I update my safety data sheets?
The supplier must update the SDS when new information on hazards or risk management becomes available, for example a new classification. As a user, keep the latest version and replace the old one when you receive an update.
What do the new CLP hazard classes mean for my SDS?
Endocrine disruptors, PBT, vPvB, PMT and vPvM are now CLP hazard classes. Mixtures placed on the market from 1 May 2026 must show them; mixtures already on the market have until 1 May 2028.
Must workers have access to safety data sheets?
Yes. REACH article 35 gives workers access to the SDS information for the substances they use, and national workplace law adds detailed rules.
Are EU exposure limits binding at my workplace?
The national limit applies at the workplace. Member states must set national limits at or below the EU binding values and take the EU indicative values into account.
Related frameworks
- Belgium: how Belgium applies these rules, with its own exposure limits and SDS language rule.
- Netherlands: Dutch rules on SDS and exposure limits.
- UN GHS: the UN system behind CLP and the SDS format.
- ISO 45001: its legal register includes these EU rules.
- CSRD and ESRS E2: reporting on substances of concern uses CLP and Candidate List data.
Official sources
- REACH on ReachLex
- CLP on ReachLex
- Chemical Agents Directive on ReachLex
- Carcinogens, Mutagens and Reprotoxic Substances Directive on ReachLex
- POPs Regulation on ReachLex
- Seveso III on ReachLex
- Waste Framework Directive on ReachLex
- Industrial Emissions Directive on EUR-Lex
Based on research of 17 November 2026. This page is not legal advice; always check the official text.