Industry substance lists

AFIRM RSL

What the AFIRM RSL means for the SDS of chemicals you apply to apparel and footwear: screen section 3 for RSL substances, then prove the product with tests.

Reviewed 16 November 2026

Quick answer

For your safety data sheets, the AFIRM RSL means checking SDS section 3 and section 15 of every chemical you apply (adhesives, inks, finishes, foams) for substances that could end up in the product. The AFIRM RSL 2026 (Version 11) is the shared restricted substances list of apparel and footwear brands, with limits, test methods and reporting limits for finished products and their materials. The SDS is a screening tool only: final proof is a laboratory test report on the material.

What it is

The AFIRM RSL lists chemicals that must not be present above a set limit in finished apparel and footwear, or in the materials that go into them, such as fabric, leather, foam, coatings, metal trims and prints. For each substance or group it gives the limit, the materials where it is likely to occur, a test method and a reporting limit for laboratories. Brands use it as the shared base of their own RSLs, so one test report can serve several brands. It complements the ZDHC MRSL: the MRSL controls the chemicals used in the factory, the RSL controls what remains in the product.

Does it apply to you?

  • You supply finished apparel, footwear, accessories or home textiles to brands that use the AFIRM RSL.
  • You make materials or components (fabric, leather, foam, trims, prints) for those products.
  • You buy chemicals such as adhesives, inks, finishes or foams that end up in those products.
  • Toys, food contact materials, PPE performance and non skin contact electronics are outside its scope.

Managing your safety data sheets

The AFIRM RSL applies to finished products and sets no SDS rule of its own. The SDS you receive is set by law (REACH article 31 and Annex II in the EU); brands using the RSL expect the following in practice.

Task What applies
Collect SDS from suppliers Get a current SDS for every chemical you apply to the product, such as adhesives, inks, finishes and foams; ask for compliance confirmation or test reports where needed.
Check against the list Check SDS section 3 for RSL substances, for example formaldehyde in adhesives and glues, and section 15 for REACH restriction and Candidate List entries.
Keep SDS current Recheck when the SDS changes and when AFIRM publishes its yearly update (by 1 February); record the version with each result.
Chemical inventory Keep an inventory of the chemicals used on site with their SDS, as evidence that inputs do not bring RSL substances into the product.
What the brand asks There is no AFIRM audit. Brands ask for test reports per material and per season, and for evidence on the chemicals you apply.

What you need to do

  1. Check which brand specific requirements apply on top of the AFIRM RSL.
  2. Test materials following the AFIRM Testing Matrix: Level 1 substances at least.
  3. Keep the test reports per material and per season.
  4. Keep a current SDS for every chemical you apply, such as adhesives, inks and finishes.
  5. Check SDS section 3 of these chemicals for substances on the RSL, for example formaldehyde in adhesives and glues.
  6. Check SDS section 15 for REACH restriction and Candidate List entries.
  7. Report REACH SVHCs above 0.1 percent in articles and decide on California Proposition 65 warnings.
  8. Show that materials are PFAS free with a total fluorine or targeted PFAS test.
  9. Test against the current AFIRM version and record the version with each result.

What NextSDS checks for you

Check SDS data used What it tells you
AFIRM RSL substances in your chemicals Section 3 (CAS numbers) Which chemicals you apply could bring an RSL substance into the product
PFAS (Appendix B) Section 3 (CAS numbers) Which chemicals contain PFAS that the RSL restricts
Pesticides (Appendix C) Section 3 (CAS numbers) Which chemicals contain a restricted agricultural pesticide
REACH entries Sections 3 and 15 Which chemicals contain Candidate List or restricted substances

The AFIRM RSL applies to articles, so the final proof is a test report on the product, not the SDS.

Key lists and limits

  • AFIRM RSL 2026, Version 11: limits in component materials of the finished product, mainly in ppm (mg/kg) and ppb, sometimes by age group or material. Examples: formaldehyde 75 ppm for adults and children and 16 ppm for babies; total fluorine 50 ppm. The RSL is a free PDF in English, Simplified Chinese, Traditional Chinese, Indonesian, Japanese, Spanish, Turkish and Vietnamese; no official Excel version was found. Official PDF (English)
  • Appendix B, PFAS: about 53 PFAS CAS numbers grouped as PFOS, PFOA, PFHxS, C9 to C14 PFCAs and PFHxA and related substances. The ZDHC MRSL refers to this list.
  • Appendix C, agricultural pesticides: 0.5 ppm each.
  • Changes in 2026: acetophenone azine added (50 ppm); bisphenol limits revised (leather 500 ppm each for BPS, BPB and BPF; BPA in polycarbonate 100 ppm; other bisphenols 200 ppm each); formamide 200 ppm in play, baby and yoga mats.
  • AFIRM Chemical Information Sheets: one sheet per substance, with where it is found and how to source compliant materials. Chemical Information Sheets

Key dates

  • September 2026: current file of the AFIRM RSL 2026, Version 11, uploaded to the AFIRM website.
  • 2026: AFIRM RSL Version 11 in force.
  • 1 January 2026: French PFAS Decree No. 2025-1376 in force, noted in the 2026 RSL.
  • Each year by 1 February: annual update of the AFIRM RSL.

Frequently asked questions

Which SDS sections matter for the AFIRM RSL?

Section 3 (composition), to see whether an RSL substance such as formaldehyde in adhesives could end up in the product, and section 15 for REACH restriction and Candidate List entries.

Is an SDS enough to prove AFIRM RSL compliance?

No. The RSL applies to finished products and materials, so brands ask for laboratory test reports per material. The SDS helps you find risky inputs before you test.

What chemical inventory do brands expect from AFIRM suppliers?

An inventory of the chemicals used on site with a current SDS for each, and evidence that inputs such as adhesives, inks and finishes do not contain RSL substances.

Does the AFIRM RSL cover REACH SVHCs and Proposition 65?

Not as RSL limits. The RSL flags REACH Candidate List duties and California Proposition 65 as additional obligations and states that AFIRM compliance does not prevent Proposition 65 enforcement.

How often is the AFIRM RSL updated?

Every year, by 1 February according to the official RSL page. The current edition is the AFIRM RSL 2026, Version 11.

What is the formaldehyde limit in the AFIRM RSL?

75 ppm for adult and children’s products and 16 ppm for baby products.

What changed in the AFIRM RSL 2026?

Acetophenone azine was added at 50 ppm, the bisphenol limits were revised and formamide got a limit of 200 ppm in play, baby and yoga mats.

Which chemicals in my inventory should I check against the AFIRM RSL?

The chemicals you apply that end up in the product, such as adhesives, inks, finishes and foams. There is no AFIRM certification; brands ask for laboratory test reports, following their own requirements.

  • ZDHC MRSL: controls the chemicals used in the factory and refers to the AFIRM PFAS list.
  • OEKO-TEX: STANDARD 100 tests textile articles against a similar list of harmful substances.
  • bluesign: its BSSL includes jewellery limits that reflect the AFIRM RSL.
  • ChemSec SIN List: NGO list of substances of very high concern, without concentration limits.
  • SMETA: social audit in which buying companies can impose customer lists such as the AFIRM RSL.

Official sources

Based on research of 16 November 2026. This page is not legal advice; always check the official text.

2,437 SDSs. None left to chase.

Managing safety data sheets under AFIRM RSL rules? NextSDS tracks down every SDS from your suppliers, processes all 16 sections and checks each one against current regulations.

Get started todaySee how NextSDS works