Quick answer
Under OEKO-TEX you keep a chemical inventory of all chemicals used on site, with a current SDS for each that workers can access, and you check the chemicals against the OEKO-TEX lists, for example SDS section 2 for the CMR hazards (H340, H341, H350, H351, H360, H361) that exclude a product from ECO PASSPORT. ECO PASSPORT certifies dyes, auxiliaries and other chemicals for the textile and leather chain: the manufacturer discloses every ingredient with its CAS number, the certification body screens it, tests a sample and checks chemical management. Certificates are renewed every year against the limits binding from 1 June.
What it is
OEKO-TEX is a family of private certifications for textiles and leather. STANDARD 100 tests a garment, fabric, yarn or accessory against a long list of harmful substances, with stricter limits for baby articles than for decoration material. ECO PASSPORT works one step earlier: it certifies the chemical products (dyes, pigments, auxiliaries, finishing agents, adhesives, leather chemicals) that mills use. The manufacturer discloses the ingredients with CAS numbers, the certification body screens them against the OEKO-TEX lists, tests a sample and checks a self assessment of chemical management. STeP certifies production sites, including chemical management, and MADE IN GREEN combines a product certificate with STeP certified sites.
Does it apply to you?
- You make or sell dyes, auxiliaries, finishes, adhesives or leather chemicals for the textile and leather chain: ECO PASSPORT is the scheme for you.
- You make textiles or textile articles and your customers ask for the STANDARD 100 label.
- You run a textile or leather production site and want STeP or MADE IN GREEN.
- Your customers are mills or brands that ask for ECO PASSPORT as a route to ZDHC MRSL conformance.
Managing your safety data sheets
The SDS itself is set by law (REACH article 31 and Annex II in the EU, GHS based rules elsewhere). OEKO-TEX adds the following expectations for the SDS and chemicals you manage.
| Task | What applies |
|---|---|
| Collect SDS from suppliers | STeP requires an SDS for every chemical used on site, accessible to employees. Mills can also ask chemical suppliers for a valid ECO PASSPORT certificate per product. |
| Check against the list | Check SDS section 3 against the OEKO-TEX RSL and the ECO PASSPORT RSL, and section 2 for the excluded CMR hazards. |
| Keep SDS current | Rescreen when the SDS changes and when new limits bind on 1 June each year; certificate holders must notify the certification body of any change in composition, concentration or ingredient supplier. |
| Chemical inventory | STeP and the ECO PASSPORT self assessment ask for a chemical register of all chemicals used, with GHS classification, composition and CAS numbers, H and P codes, EC and REACH registration numbers and stock. |
| What the certifier asks | A STeP or STANDARD 100 auditor asks for the chemical inventory, the SDS and proof that the chemicals meet the RSL and MRSL. An SDS does not replace the full ingredient disclosure, lab testing or the on site visit for ECO PASSPORT. |
What you need to do
- Disclose all ingredients and known impurities of each chemical product with CAS numbers to your certification body.
- Check each product against the OEKO-TEX RSL and the ECO PASSPORT RSL before you apply.
- Make sure no product is classified H340, H341, H350, H351, H360 or H361.
- Do not add restricted substances on purpose, even below the threshold.
- Confirm in the self assessment that you keep up to date, country specific GHS SDS for every product you make.
- Keep a chemical register of all chemicals used on site.
- Phase out substances on the REACH Candidate List.
- Label all chemical containers with the content name and hazard pictograms.
- Prove ready biodegradability for surfactants, water softeners and chelating agents.
- Notify the certification body of any change in composition, concentration or ingredient supplier.
- Renew certificates every year against the limits in force after 1 June.
What NextSDS checks for you
| Check | SDS data used | What it tells you |
|---|---|---|
| ECO PASSPORT limit values | Section 3 (CAS numbers) | Which components are restricted in the chemical product and at what limit |
| STANDARD 100 limit values | Section 3 (CAS numbers) | Which components could bring a restricted substance into the textile article |
| Excluded CMR hazards | Sections 2 and 3 (H340, H341, H350, H351, H360, H361) | Which products cannot be certified under ECO PASSPORT |
| Environmental hazards under observation | Section 2 (H400, H410, H411, H413, H420) | Which products OEKO-TEX is watching |
| REACH Candidate List | Sections 3 and 15 | Which products contain SVHCs that must be phased out |
| Biodegradability | Section 12 | First evidence on ready biodegradability of surfactants and similar products |
| Composition changes | Section 3 across SDS versions | When to notify your certification body |
An SDS lists only hazardous components, so it does not replace the full disclosure, the lab analysis or the on site visit.
Key lists and limits
- OEKO-TEX RSL (Version 03.2026 of 1 September 2026): limit values for STANDARD 100, ECO PASSPORT, LEATHER STANDARD, ORGANIC COTTON and PPE, mostly in mg/kg, PFAS in µg/kg. For ECO PASSPORT it gives a threshold, a limit for certification with restriction and a limit for undiluted products. Official Excel
- ECO PASSPORT RSL: the CAS screening list with about 2,270 CAS numbers, including all PFAS on the OECD list as no intentional use. Official PDF
- STeP MRSL: substances banned at production sites, in Annex 3 of the STeP standard.
- 2026 changes: new substances such as DBDPE, Dechlorane Plus and n-hexane; bisphenols B, F, S and AF set to 200 mg/kg in STANDARD 100 and 1000 mg/kg in ECO PASSPORT. New regulations 2026
- ZDHC: ECO PASSPORT is a recognised route to ZDHC MRSL conformance. STANDARD 100 overlaps with brand lists such as the AFIRM RSL.
Key dates
- 1 June 2027: end of transition for biodegradability proof by traders and for STANDARD 100 upstream certificate rules.
- 1 September 2026: OEKO-TEX RSL Version 03.2026 published.
- 1 June 2026: 2026 regulations binding; biodegradability proof required in ECO PASSPORT.
- 3 March 2026: 2026 regulations published.
- January 2026: ECO PASSPORT uses the hydrolysis method for PFAS detection.
- 6 October 2025: PFOS limit set to 25 µg/kg.
- Each year: new criteria normally published in March and binding from 1 June.
Frequently asked questions
What chemical inventory does OEKO-TEX STeP ask for?
A chemical inventory list of all chemicals used on site, including production, laundry, cleaning and maintenance, with GHS classification, composition with CAS numbers, H and P codes, EC and REACH registration numbers and stock levels.
Must workers have access to the SDS under STeP?
Yes. STeP requires an SDS for each chemical on site, accessible to employees.
Can an SDS prove compliance with the STeP MRSL?
It can help. STeP lets a facility prove MRSL compliance with supplier declarations, third party certificates or safety data sheets, at the discretion of the certification body.
Which SDS hazard classifications exclude a product from ECO PASSPORT?
Products classified H340, H341, H350, H351, H360 or H361, the CMR hazard statements in SDS section 2, cannot be certified.
Is the SDS enough for the ECO PASSPORT disclosure?
No. ECO PASSPORT asks for all ingredients and known impurities with CAS numbers, while an SDS lists only hazardous components. Notify your certification body of any change in composition, concentration or ingredient supplier.
What is the difference between OEKO-TEX STANDARD 100 and ECO PASSPORT?
STANDARD 100 tests textile articles such as garments, fabrics and yarns for harmful substances. ECO PASSPORT certifies the chemical products, such as dyes and auxiliaries, that mills use to make them.
When do new OEKO-TEX requirements apply?
New criteria are normally published in March and become binding on 1 June of the same year, and certificates are valid for one year. The 2026 regulations were published on 3 March 2026 and became binding on 1 June 2026.
Who issues OEKO-TEX certificates?
Accredited OEKO-TEX certification bodies in Europe and Japan. The official list names 17, among them Centexbel in Belgium.
Related frameworks
- ZDHC MRSL: ECO PASSPORT is a recognised route to MRSL conformance.
- AFIRM RSL: brand list for finished products that overlaps with STANDARD 100.
- bluesign: another system that assesses textile chemical products before use.
- ChemSec SIN List: NGO list of substances of very high concern, without concentration limits.
Official sources
- OEKO-TEX standards
- OEKO-TEX downloads
- ECO PASSPORT Standard, Edition 03.2026
- STANDARD 100 Standard, Edition 01.2026
- OEKO-TEX RSL (Excel)
- New regulations 2026
- OEKO-TEX offices and certification bodies
Based on research of 16 November 2026. This page is not legal advice; always check the official text.