Quick answer
SQAS expects a logistics company to hold a current manufacturer SDS on site for every product it transports or handles (Core question 2.3.1), to ask for it before accepting a new product and to reach it quickly in an emergency. Chemical distributors assessed under ESAD must also pass the SDS on to customers in the local language with samples and first orders, log every SDS sent and forward revisions. SQAS is the Cefic on site assessment that chemical companies use to evaluate hauliers, warehouses, tank cleaners and rail operators; it gives a factual report, not a certificate, valid for three years.
What it is
Chemical companies hand most of their transport, storage and distribution to third parties. Instead of each shipper auditing each logistics company, Cefic created SQAS in 1994 as one standard on site assessment by an accredited independent assessor. The assessor scores a Core questionnaire common to all logistics companies plus one or more modules for the activity. Distributors are assessed under ESAD, which adds a distributor supplement on product stewardship and safety data sheets. The report goes into a central database that member chemical companies can consult, and TfS accepts it as equivalent to a TfS audit.
Does it apply to you?
- You transport, store, clean tanks for or handle products of chemical companies in Europe, and a shipper asks for an SQAS report.
- You are a chemical distributor: ESAD applies, with extra modules if you run storage, filling or blending sites, sell food, cosmetic or pharma grades, or sell chlorinated solvents.
- You supply TfS member companies as a logistics provider or distributor: an SQAS or ESAD report counts as a TfS audit when you agree to share it.
Managing your safety data sheets
| Task | What applies |
|---|---|
| Collect SDS from suppliers | A written product acceptance procedure asks for product safety data before you handle a new product (Core 2.3.1). Container depots must know the SDS of products not handled before (10.1.2.2). |
| Check language and version | Keep the current manufacturer version; the data must comply with REACH and CLP, which is the responsibility of the consignor or manufacturer (Core 2.3.1). Container depots prefer the local language of the storage location or English (10.1.2.2). |
| Keep SDS current | Keep the SDS of every product current. Distributors capture changes, record them with their date and send revisions in good time (ESAD 6.5.1). |
| Give access on site and in emergencies | Keep the SDS on site for every product transported or handled (Core 2.3.1), make sure it can be sent quickly to emergency responders (ESAD 4.6.2) and keep a fallback if the main office is lost (ESAD Site 1.3.2.3). |
| Use them for storage and handling | Segregate, store and label according to local legislation and the SDS; store at the temperature and ventilation required by national rules and the supplier SDS (ESAD Site 4.1.25, Warehouse 7.2.11). |
| Pass SDS on (distributors) | Have a written procedure for issuing SDS, send them in the local language with samples and first orders, also for non classified products, and record addressee and date for every SDS sent (ESAD 6.4.1 to 6.4.6). |
| Keep a chemical register | Know what is in stock: warehouses refuse products their permit does not allow and never exceed permitted storage quantities (Warehouse 6.1.2.2 and 6.1.2.3). Keep a legal register (Core 1.1.3.1). |
| What the assessor asks | The SDS library and acceptance procedure, proof of quick access in an emergency, storage and labels checked against the SDS and, for distributors, the SDS dispatch log. |
What you need to do
- Keep a current manufacturer SDS on site for every product you transport or handle (Core 2.3.1).
- Require product safety data before accepting a new product, through a written acceptance procedure.
- Refuse products that your operating permit does not allow and never exceed permitted storage quantities (Warehouse 6.1.2.2 and 6.1.2.3).
- Segregate products by hazard class and compatibility as your permit and local rules require, and display the rules in storage areas.
- Store at the temperature and ventilation required by national rules and the supplier SDS.
- Label packages for transport (ADR) and for supply and use (CLP), at least in the local language.
- Make sure SDS can be sent quickly to emergency responders, also if the main office is lost.
- As a distributor, issue an SDS in the local language with samples and first orders, log every SDS sent and send revisions in good time (ESAD 6.4 and 6.5).
- Keep a legal register for safety, health, environment, quality and security law and review compliance (Core 1.1.3.1).
- Train staff on dangerous goods and emergency procedures, and involve your dangerous goods safety adviser after incidents.
What NextSDS checks for you
| Check | SDS data used | What it tells you |
|---|---|---|
| SDS library completeness and currency | Whole SDS, revision date | Which products lack a current manufacturer SDS |
| SDS language | Whole SDS | Whether each SDS is in the language required in the country of the site |
| Permit quantities | Sections 2 and 3 | Stock per storage area summed by hazard class, compared with permit categories (for example VLAREM rubriek 17 in Flanders) |
| Segregation | Section 7, section 2 pictograms, section 14 | Which products must be stored apart |
| Labelling | Sections 2 and 14 | Pictograms, H and P statements and UN number to compare with labels |
| Emergency pack | Sections 2, 4 to 7 and 14 | Information responders need per storage location |
| Dangerous goods | Section 14 | UN number, class and packing group per product |
| CMR products | Section 3 | Which products contain carcinogenic, mutagenic or reprotoxic substances |
| Exposure limits | Section 3, section 8 | Which substances have a national exposure limit |
Key lists and limits
- SQAS and ESAD have no substance list and no limit values of their own.
- They rely on the lists in law: the ADR, RID, ADN and IMDG dangerous goods lists, CLP classification, the REACH Candidate List and restrictions, national exposure limit lists and the substances and quantities allowed by your environmental permit.
- For Belgium see Belgium and Flanders; for the Netherlands see the Netherlands.
Key dates
- 17 July 2026: ESAD 2026 questionnaires in effect for distributor assessments.
- 15 September 2025: SQAS 2025 questionnaires used in all assessments.
- Every three years: full re assessment.
Frequently asked questions
Is SQAS a certificate?
No. An SQAS assessment results in a detailed factual report, not a certificate, valid for three years. Each chemical company judges the report against its own requirements; intermediate assessments of selected chapters do not extend the validity.
What is the difference between SQAS and ESAD?
SQAS covers logistics service providers such as hauliers, warehouses, tank cleaners, container depots and rail operators. ESAD is the version for chemical distributors, combining the SQAS Core with a distributor supplement on product stewardship and SDS.
What does SQAS expect from my SDS management?
A current manufacturer SDS on site for every product you transport or handle, and a written product acceptance procedure that asks for product safety data before you handle a new product (Core 2.3.1).
Do I have to pass SDS on to customers under ESAD?
Yes, as a distributor. ESAD 6.4 asks for an SDS in the local language with each sample and with the first order, also for non classified products, and a record of addressee and date for every SDS sent. Revisions must be sent in good time (ESAD 6.5.1).
How fast must I reach an SDS in an emergency?
ESAD 4.6.2 asks that SDS can be quickly transmitted to emergency responders, and ESAD Site 1.3.2.3 asks for SDS that are easily accessible in an emergency, with a fallback if the main office is destroyed.
Do I need a stock list of chemicals for SQAS?
The Warehouse module asks you to refuse products your operating permit does not allow and never exceed permitted storage quantities (6.1.2.2 and 6.1.2.3). A stock list per product and hazard class makes that check possible.
Does TfS accept an SQAS or ESAD report?
Yes. TfS accepts SQAS assessments of logistics providers and ESAD assessments of distributors as equivalent to a TfS audit, when the supplier agrees to share the report with TfS members.
Who can see my SQAS report?
For one month only you can see it, and you can deny access to specific chemical companies. After that it is visible to SQAS Service Group member companies that were not denied access.
Related frameworks
- Responsible Care: the Cefic programme SQAS and ESAD belong to.
- Together for Sustainability: accepts SQAS and ESAD reports as equivalent to a TfS audit.
- VCA: contractor safety certificate often asked of the same logistics companies.
- Belgium: federal SDS language and workplace chemical rules.
- Flanders: permit categories and storage rules for warehouses.
- Netherlands: Dutch hazardous substances and storage rules.
Official sources
- SQAS website
- SQAS resources: all questionnaires and guidelines
- SQAS/ESAD Guidelines, September 2024 (PDF)
- News: SQAS 2025 questionnaires live
- News: ESAD 2026 in effect
- Fecc ESAD Steering Committee
Based on research of 16 November 2026. This page is not legal advice; always check the official text.