Rule update ·

New EU limits for cobalt, PAH, isoprene and 1,4-dioxane, and welding fumes join the carcinogens directive

Directive (EU) 2026/2450 adds binding limits for cobalt, isoprene and 1,4-dioxane, a numeric PAH value and CMR welding fumes. Check section 8 of the SDS for these substances.

Key dates

  1. Published in the Official Journal
  2. Member states must have transposed it
  3. End of the transitional cobalt values
  4. End of the transitional PAH value in nine sectors

What changed

Directive (EU) 2026/2450 is the sixth amendment of the EU directive on carcinogens, mutagens and reprotoxic substances at work (Directive 2004/37/EC). It was adopted on 21 October 2026, published on 30 October 2026 and enters into force on 19 November 2026.

It changes the binding occupational exposure limits in Annex III:

Substance New binding limit Transitional value
Cobalt and inorganic cobalt compounds 0,01 mg/m3 inhalable and 0,0025 mg/m3 respirable, with dermal and respiratory sensitisation notations 0,02 and 0,0042 mg/m3 until 20 November 2032
Polycyclic aromatic hydrocarbons (PAH), measured as benzo[a]pyrene 0,00007 mg/m3, skin notation 0,00014 mg/m3 until 20 November 2033, only in nine sectors such as foundries, coking plants and aluminium
Isoprene 8,5 mg/m3 (3 ppm) None
1,4-Dioxane 7,3 mg/m3 (2 ppm), short term 73 mg/m3 (20 ppm), skin notation None

The directive also adds welding fumes to Annex I: work with fumes from welding processes that contain carcinogenic, mutagenic or reprotoxic substances (category 1A or 1B) now falls under the directive, and the Annex III limits of those substances apply to the fume. 1,4-Dioxane gets a binding biological limit value of 45 mg HEAA in urine per g creatinine. Respiratory protection becomes a last resort that must be correctly chosen, fitted and maintained, and workers who wear it get a right to regular breaks in clean air.

Who it affects

Member states must transpose the directive by 20 November 2028. From then on it affects every employer whose workers are exposed to cobalt compounds, PAH containing products such as coal tar, pitch and creosote, isoprene or 1,4-dioxane, and every employer with welding that releases CMR substances, for example chromium (VI) or nickel compounds. Each country puts the values into its own exposure limit list, so check the national guide: Belgium, Germany, France and the Netherlands.

What to do with your safety data sheets

  1. Find the products that contain cobalt compounds, PAH, isoprene or 1,4-dioxane: section 3 of each SDS lists the CAS numbers.
  2. Check section 8 of those SDS. Suppliers will add the new binding values once they apply; until then the SDS may still show older or no values.
  3. Collect the SDS of your welding consumables (electrodes, wires, fluxes) and check sections 3 and 8 for chromium, nickel and cobalt compounds.
  4. Update your risk assessment where these products are used.
  5. Follow the national transposition in your country guide, because the national value is the one an inspector checks.

The EU baseline is in the European Union guide.

Official sources

Published 18 November 2026, 12:16 CET, based on the official texts linked above. Not legal advice; always check the official text.

Key dates

  1. Published in the Official Journal
  2. Member states must have transposed it
  3. End of the transitional cobalt values
  4. End of the transitional PAH value in nine sectors

2,437 SDSs. None left to chase.

NextSDS tracks down every safety data sheet from your suppliers, processes all 16 sections and checks each one against current regulations.

Get started todaySee how NextSDS works