Quick answer
As an employer in Germany, get a current SDS in German from your supplier for every hazardous product, give your workers access to it and use it in the written risk assessment required by the Gefahrstoffverordnung (GefStoffV § 6). Keep a hazardous substances register (Gefahrstoffverzeichnis) that refers to each SDS, and keep exposure below the binding occupational exposure limits (AGW) of TRGS 900.
What it is
Almost all chemical rules in Germany are federal law, enforced by the labour and environmental authorities of the Länder. The Gefahrstoffverordnung (GefStoffV) sets the duties of employers who work with hazardous substances, and it transposes the EU Chemical Agents and CMR Directives. The Technical Rules for Hazardous Substances (TRGS), drawn up by the Committee on Hazardous Substances (AGS) and published by the Federal Ministry of Labour, make the ordinance concrete. If you follow a TRGS, you are presumed to comply (GefStoffV § 7 (2)). Several TRGS are lists that can be checked against an SDS, such as TRGS 900 (exposure limits), TRGS 905 (national CMR list) and TRGS 510 (storage).
Does it apply to you?
- You employ people in Germany who use, store or can be exposed to hazardous substances. Storage counts as an activity under the GefStoffV.
- You use carcinogenic, mutagenic or reprotoxic substances of category 1A or 1B, or substances and activities listed in TRGS 905 and TRGS 906.
- You employ young workers or pregnant or breastfeeding workers (Jugendarbeitsschutzgesetz § 22, Mutterschutzgesetz §§ 11 and 12).
- You store hazardous substances in packages, drums or tanks: TRGS 510, the water protection ordinance AwSV and, for larger quantities, the Störfall Verordnung (Seveso) apply.
- You sell chemical products in Germany: the SDS and the label must be in German and hazardous mixtures must be notified for poison centres.
Managing your safety data sheets
| Task | What applies in Germany |
|---|---|
| Get an SDS for every hazardous product | The employer must obtain the supplier information and use the SDS received under REACH Title IV in the risk assessment (GefStoffV § 6 (2)). |
| Check the language | The SDS must be in German (REACH article 31(5); TRGS 220 no. 3.5). For unpackaged supply, each delivery comes with safety information or an SDS in German (GefStoffV § 4 (4)). |
| Check the version and content | Use the current version, check it for obviously incomplete, contradictory or wrong data and ask the supplier for a correct SDS if needed (TRGS 400 no. 5.1). |
| Give workers access | Workers must have access to the information under REACH article 35, in particular the SDS (GefStoffV § 14 (1)). Access can be on paper or digital (TRGS 555). |
| Use the SDS in the risk assessment | Assess and document the hazards before work starts, whatever the number of employees (GefStoffV § 6 (1) and (8)). |
| Keep a hazardous substances register | List each hazardous substance with its name, classification, quantity ranges, work areas and a reference to the SDS (GefStoffV § 6 (12)). |
| Write operating instructions | Give workers a written Betriebsanweisung based on the risk assessment, and instruct them orally before they start and at least once a year (GefStoffV § 14). |
| What an inspector asks | A German SDS for every hazardous product, the documented risk assessment, the hazardous substances register, the operating instructions and proof of compliance with the AGW. |
What you need to do
- Collect a current SDS in German for every hazardous product and check it for obvious errors.
- Assess and document the chemical risks with the SDS before work starts.
- Keep the hazardous substances register up to date, with a reference to each SDS.
- Make the SDS and the register accessible to the workers concerned and their representatives.
- Write a Betriebsanweisung for each workplace and instruct workers at least once a year.
- Check every substance against TRGS 900 and keep exposure below the AGW; check it by measurement or other suitable methods.
- Check products against TRGS 905, TRGS 906 and CLP for CMR substances and apply the stricter CMR rules.
- Keep substances classified acute toxic category 1, 2 or 3 locked or accessible only to instructed persons.
- Find the storage class (Lagerklasse) and water hazard class (WGK) of each product and apply TRGS 510 and the AwSV.
- Add up stored quantities to check the permit and Seveso thresholds.
- Notify hazardous mixtures you place on the market to the BfR, through the ECHA portal or directly, before you sell them.
What NextSDS checks for you
| Check | SDS data used | What it tells you |
|---|---|---|
| SDS language | Whole SDS | Whether the SDS is in German |
| German exposure limits | Section 3 (CAS numbers), section 8 | Which substances have an AGW in TRGS 900 and its value |
| National CMR list | Section 2, section 3 | Whether a substance is in TRGS 905 and counts as CMR at work |
| Hazardous substances register | Sections 1 and 2 | Name and classification for each register entry, linked to the SDS |
| Storage class | Sections 2, 7.2, 9 and 14 | The Lagerklasse under TRGS 510 and which products may be stored together |
| Water hazard class | Section 15, section 3 | The WGK stated in the SDS, checked against the official UBA database |
| Seveso thresholds | Sections 2, 3 and 9 | Which products count towards the Störfall Verordnung thresholds |
| Young and pregnant workers | Section 2 (hazard statements) | Which products need extra care for these workers |
Key lists and limits
- TRGS 900 Arbeitsplatzgrenzwerte (AGW): the binding exposure limit list with about 490 entries, as shift averages with peak limitation factors. The employer must make sure the AGW are met (GefStoffV § 7 (8)). BAuA TRGS 900
- TRGS 910 acceptance and tolerance concentrations: for carcinogens of category 1A or 1B without a health based AGW. They set the low, medium and high risk ranges and the measures that follow. BAuA TRGS 910
- EU binding limit values: the limits of Annex III of the CMR Directive 2004/37/EC apply directly in Germany after the transposition deadline, also where TRGS 900 or TRGS 910 has no entry yet (GefStoffV § 7 (8)).
- TRGS 905: national list of carcinogenic, mutagenic and reprotoxic substances that adds to CLP Annex VI. Listed substances count as CMR for all workplace duties, and SDS section 15 must mention them. BAuA TRGS 905
- TRGS 906: carcinogenic or mutagenic activities and processes, such as hardwood dust, respirable crystalline silica and diesel engine exhaust. BAuA TRGS 906
- TRGS 510 storage classes (LGK): derived from CLP hazard statements or the ADR class; they decide which products may be stored together and when a dedicated store is needed, for example above 50 kg of acute toxic category 1 to 3 or 1,500 kg of all hazardous substances. TRGS 220 asks that SDS section 7.2 state the LGK. BAuA TRGS 510
- Water hazard classes (WGK 1, 2, 3) under the AwSV: decide containment and the hazard level of a store. A substance without a classification counts as WGK 3. TRGS 220 asks that SDS section 15 state the WGK. UBA Rigoletto database
- Störfall Verordnung (12. BImSchV): the German Seveso III rules, with lower and upper tier thresholds per CLP category and for named substances. Störfall Verordnung
- CLP Annex VI: the harmonised classification, read together with TRGS 905. ReachLex
Key dates
- 1 January 2029: the AGW for diisocyanates of 0.006 mg/m³ applies; the transitional value of 0.010 mg/m³ ends on 31 December 2028.
- 28 July 2027: transitional period for proof of expertise (Sachkunde) for certain biocide uses under GefStoffV § 25 (2) ends.
- 1 June 2027: the AGW of 15 substances, such as phosgene, n-hexane and cyclohexanone, are lowered to the EU indicative limits.
- 1 July 2026: lower AGW for acrolein and sulphur dioxide apply.
- 5 June 2026: TRGS 900 and TRGS 905 updated (GMBl 2026 no. 16), with new limits for cobalt and pyridine.
- 20 December 2025: GefStoffV amendment on asbestos in force.
- 1 January 2025: hazardous mixtures used only in industry must also carry a UFI.
- 5 December 2024: GefStoffV reform in force, with the risk based concept for carcinogens and the reworded register duty.
Frequently asked questions
Must a safety data sheet be in German in Germany?
Yes. REACH article 31(5) requires the SDS in the official language of the country where the product is placed on the market, which is German. TRGS 220 confirms that SDS for products placed on the market in Germany must be written in German.
What must a Gefahrstoffverzeichnis contain?
GefStoffV § 6 (12) requires at least the name of each hazardous substance, its classification or hazardous properties, the quantity ranges used, the work areas where workers can be exposed and a reference to the SDS. It is not required when only low hazard activities take place.
Must my workers have access to the safety data sheets?
Yes. GefStoffV § 14 (1) gives workers access to the information on the substances they work with, in particular the SDS. The register entries, except quantities, must also be accessible to the workers concerned and their representatives.
How do I use the SDS in the risk assessment?
GefStoffV § 6 requires the employer to use the SDS as information from the supplier and to document the assessment before work starts. TRGS 400 calls the SDS the most important information source and asks you to request a corrected SDS when data are clearly wrong.
Are the TRGS 900 exposure limits binding?
Yes. GefStoffV § 7 (8) requires the employer to make sure the AGW in TRGS 900 are met and to check this by measurement or other suitable methods. The EU binding limits of Directive 2004/37/EC apply as well.
What is the storage class (Lagerklasse) in an SDS?
It is the class under TRGS 510 that decides which hazardous substances may be stored together. It follows from the CLP hazard statements in section 2 or the ADR class in section 14, and TRGS 220 asks suppliers to state it in section 7.2.
Where do I find the water hazard class (WGK)?
SDS section 15 should state it, and the Umweltbundesamt publishes the official classifications in its Rigoletto database. The WGK decides the containment and the hazard level of your store under the AwSV.
Related frameworks
- European Union: REACH, CLP and the EU directives that German law builds on.
- France: neighbouring country with its own binding exposure limit list.
- Netherlands: neighbouring country with a substance list that refers to each SDS.
- Belgium: neighbouring country with a German speaking region and its own exposure limits.
- Switzerland: German speaking neighbour outside the EU with its own chemical rules.
- ISO 45001: its legal register (clause 6.1.3) includes these German workplace rules.
- ISO 14001: its compliance obligations include the AwSV and the Störfall Verordnung.
- ADR: road transport of dangerous goods, applied in Germany by the GGVSEB.
- Biocides: EU biocide rules, with BAuA as the German authority.
Official sources
- Gefahrstoffverordnung (GefStoffV)
- GefStoffV reform of 2 December 2024 (BGBl. 2024 I no. 384)
- TRGS 900 Arbeitsplatzgrenzwerte (BAuA)
- TRGS 220 national aspects of safety data sheets (BAuA)
- AwSV, installations handling water hazardous substances
- UBA Rigoletto, water hazard classes
- BfR, UFI code and poison information (PDF)
- REACH article 31 on ReachLex
- CLP Annex VIII, poison centre information, on ReachLex
Based on research of 17 November 2026. This page is not legal advice; always check the official text.